烏魯木齊軟膜天花安裝公司敘述天花透光膜安裝工藝。對于軟膜天花透光膜如何安裝，客戶都知之甚少。

For the soft film smallpox transparent film how to install, customers are poorly understood.

1.當所有的安裝軟膜天花透光膜的鋁合金龍骨固定好以后，再安裝軟膜。先把軟膜打開用華藝專用的加熱風炮充分加熱均勻，然后用華藝專用的插刀把軟膜張緊插到鋁合金龍骨上，最后把四周多出的軟膜修剪完整即可。

1 when the Aluminum Alloy piamater ceiling keel installation transparent film all fixed up later, and then install the piamater. The film opened with a dedicated Huayi full heating air heating evenly, then use Huayi special knife inserted film tension is inserted into the Aluminum Alloy keel, the film can be more around the complete pruning.

2.安裝完畢后，用干凈毛巾把軟膜天花清潔干凈。

2 after installation, with a clean towel to clean soft film smallpox.

步驟一：

Step one:

1.根據圖紙設計要求，在需要安裝軟膜天花的水平高度位置四周圍固定一圈4X4Cm支撐龍骨(可以是木方或方鋼管)。 附注:有些地方面積比較大時要求分塊安裝以達到良好效果.這樣就需要中間位置加一根木方條子。這是根據實際情況再實際處理.

1 according to the requirements of design drawings, the position of the height level around the need to install piamater ceiling around a ring of 4X4Cm (fixed support keel can be wood or steel). Note: some parts of the area is relatively large when required to achieve a good effect. This is based on the actual situation and then the actual processing.

2.當所有需要木方條子固定好之后，然后在支撐龍骨的底面固定安裝軟膜天花的鋁合金龍骨。

2 when all need wood slivers fixed, and then in the Aluminum Alloy keel support keel bottom fixed installation soft film ceiling.

步驟二：

Step two:

1.當所有的安裝軟膜天花的鋁合金龍骨固定好以后，再安裝軟膜。先把軟膜打開用華藝專用的加熱風炮充分加熱均勻，然后用華藝專用的插刀把軟膜張緊插到鋁合金龍骨上，最后把四周多出的軟膜修剪完整即可。

1 when Aluminum Alloy keel all installed soft film ceiling fixed after installing film. The film opened with a dedicated Huayi full heating air heating evenly, then use Huayi special knife inserted film tension is inserted into the Aluminum Alloy keel, the film can be more around the complete pruning.

2.安裝完畢后，用干凈毛巾把軟膜天花清潔干凈。

2 after installation, with a clean towel to clean soft film smallpox.

以上就是相關產品的全部內容了，如果還有什么不太了解的地方，烏魯木齊軟膜天花安裝公司專業的客服會為您詳細解答，下次我們會為您介紹新疆軟膜天花吊頂的優勢，敬請關注！